Tel/Fax: +39 055.828315 [email protected] / Facebook
Tel/Fax: +39 055.828315 [email protected] / Facebook
Motus Triathlon
Cart empty 🛒
Manufacturer
Sports Passion

News on Triathlon, cycling, running and Swimming

The latest news from the Joomla! Team

How to clean and store a wetsuit

Taking care of our equipment is an excellent choice to extend the life of our neoprene and enjoy it as we did on the first day.

1. CLEANING THE SUIT

By cleaning our wetsuit after each use we will be able to keep all the properties of its materials in perfect condition.

This procedure must be done especially after using the neoprene in salt water or in water with chlorine.

Duration: 10 minutes
Materials: Water, neutral pH soap.



1. Clean the suit with fresh water to remove excess salt water or chlorine.

2. Apply a small amount of neutral pH soap to the suit and gently scrub the suit panels.

3. Rinse the neoprene to remove any soap residue.

4. Turn the wetsuit over and hang it from the waist to dry naturally without exposing it to direct sunlight or any heat source.

2. KEEP OUR SUIT


Proper storage of the wetsuit will prevent the appearance of wrinkles in the neoprene and will keep the seams free from tension over time.

The best way to store a wetsuit is to hang it at the waist, to avoid tension in the most sensitive areas (shoulders and arms).



1. In high elasticity suits (eg Orca Alpha, Orca Predator), it is very important not to use a hook to hang the suit from behind.

2. In other models it is possible to use a coat hanger, as long as it is wide and the neoprene is not subjected to tension in the neck and shoulders.

3. To protect the SCS liner on the outside of the suit, it is recommended to add a small layer of talcum powder when storing it for long periods of time to better preserve the liner.

ORCA openwater CORE HI-VIS wetsuit


The Openwater Core Hi Vis is the perfect wetsuit for swimmers who want to get started with open water safely. This wetsuit features high visibility, shoulder flexibility and a neutral buoyancy. High visibility panels on the arms and legs make you easily recognizable while swimming, even from a great distance. The high flexibility of the shoulders make your first open water workouts very comfortable, while thanks to the buoyancy it will make you feel safe.


YAMAMOTO 38
2.5mm Yamamoto 38 material is used in the torso and legs. In this area, there is less distortion than in the upper body. In these areas, elasticity is not given the same importance, so materials with more compression characteristics like this Yamamoto 38 can be used. This technology provides a good fit to the swimmer's body, preventing water from flowing between the suit and the skin.
YAMAMOTO 38
For greater flexibility in all phases of the stroke, Yamamoto 39 neoprene is used in conjunction with the high-end 2mm Infinityskin liner. This material has a high elasticity which allows it to be used in different areas of mid-range wetsuits. For fast, short-distance movements, such as those in the arms and especially in the elbow, this material requires 35% less strength than conventional neoprene. For long-distance movements, such as in the shoulders, it requires 45% less force than conventional neoprene

HIGH VISIBILITY'
To keep you as safe as possible in the water, this wetsuit has been designed with a high visibility orange that will make you visible to boats and other swimmers, so you can be located at any time.

MADE TO LAST
The unique design of this product is based on the best materials available in the market. Orca works closely with Yamamoto Corporation to develop new materials for their wetsuits. The exclusive materials Orca 0.88 Free and Yamamoto 44 are proof of this. Orca is also the only certified brand to make all of our suits using exclusive Yamamoto material, ensuring the highest quality in all products. Currently, the most sustainable raw material for obtaining neoprene is limestone, compared to other much more polluting processes in which lower quality neoprene is obtained from oil. The process for obtaining neoprene from limestone was developed in the 1960s by the Yamamoto company and has been perfected over time to arrive at the current process, where the best quality is obtained from neoprene. Not only the characteristics of this neoprene contribute to its best performance, but also ensure its maximum durability. Other very important materials in our products that can go unnoticed are the materials used for packaging. To minimize the impact of these, starting in 2020, our entire range of wetsuits and accessories uses recycled cardboard packaging instead of single-use plastics.


CARE OF THE WETSUIT TO LAST
Cleaning the wetsuit
Neoprene can be damaged by excess salt or other disinfectants such as chlorine when used in swimming pools. It is important to wash the suit with full water. You can use a small amount of neutral pH soap and then rinsed off. Once cleaned, make sure it dries so it doesn't retain moisture, outdoors or in a ventilated indoor space without direct exposure to sunlight as this can damage materials.
storage
Properly storing the wetsuit prevents materials and seams from being folded and stressed for long periods of time. It also prevents the appearance of wrinkles on the material that can affect both the wetsuit's durability and its aesthetics.
The best way to store the neoprene is to hang it in the center, so that the most sensitive areas like the shoulders and arms don't have any kind of tension on them. For this model you can use a hook if you cannot hang it halfway, as long as it is wide enough not to stretch the suit in the shoulder and neck area. Voyage
Although travel time requires such a small amount of the payoff of a life suit, it is important to keep in mind that every time it is worn, it must be carried. Poor carrying, even for short periods, can shorten the life of your suit. It is not recommended to compress or curl the suit during transport, especially in the seam areas. It is also recommended to rinse with fresh water before transporting it after it has been used. Be careful that the wetsuit is not stored in high temperatures (such as in a hot car), as this can accelerate its degradation. The elasticity of the upper part of this suit allows you to adapt the size in this area well to different bodies. However, the bottom sizing needs to be adjusted due to the thickness of the panels. So if the size guide suggests going up one size, plan on weight affecting sizing more on chest and height measurements

Running shoe ENDA LAPATET 1.5, made in Kenya

ENDA LAPATET 1.5
lapa1
The LAPATET 1.5 has in its name the DNA of its origins, in fact Lapatet in the dialects of
some Kenyan tribes means "RUN"
It is a versatile shoe that is well suited to both daily training, thanks to the level of
cushioning, which to the most performing race by virtue of its technical characteristics
who wink at a race with a predominantly midfoot attack; without
underestimate the comfort that is perceived immediately, at the first fit, thanks to the space
wide in the forefoot area and to the particular attention given to the area of the
heel.
So let's see, in detail, the characteristics of the E NDA LAPATET 1.5

The UPPER is made of light and soft knit, without seams (seamless) that allows
to the foot to lodge in the shoe without any constriction. The plot is managed with
waves with 2 different densities to offer adequate (denser wave) and perfect containment
flexibility (lower density wave) and crease lines that follow the movement of the foot
during all phases of the roll.
lapa2
Furthermore, the alternation of the density of the fabric waves allows a perfect coupling
with the socks and the upper itself reducing the risk of chafing affecting the skin of the
feet and the resulting performance while running.

The weave of the knit allows a high breathability and a dispersion of the heat produced
from the movement of the feet reducing the humidity that is deposited in the shoe.
To the upper are connected 2 collars for the passage of the laces, laces that pass through
holes made with the same yarn as the collars, thus eliminating rings of rigid materials
which are poorly adapted to the structure of the tongue ( TONGUE ) which turns out to be thin
and soft, reconciling the comfort of fit with the containment of the overall weight of the
shoe.
lapa3
The particular construction of the upper, in the rear area of the shoe, allows you to
obtain a soft and minimally invasive heel counter on the Achilles tendon e
on the heel which, however, allows to obtain a good control of the phases of first support
thanks to the work of the midsole and its particular structure in that portion of the
shoe.
lapa4
In the internal medial portion of the upper there is the ENDA logo, which represents the
tip of the spears typical of Kenyan peoples, as well as the reference to the flag of
Kenya with 2 straps placed to the right and left of the collar where the system ends
lacing.
lapa5
The midsole is developed with some tricks that allow a fluidity of the gesture
ideal in all situations. It is made with a central body in EVA that allows a
excellent dissipation of load forces in the medial area of the foot and is supplemented by two
inserts (one front and one rear) with slightly increased density to obtain
precisely a correct movement dynamics. The rear insert stabilizes the whole
rear foot and is in the lower portion of the midsole and works directly with the lightweight
heel collar to get the best balance between these 2 important components of the
footwear. The insert, higher in the back of the shoe, tapers towards the side
medial, obtaining in the second step a control of the longitudinal torsion of the shoe.
To optimize cushioning, a layer of midsole remains between this insert
the assembly midsole, the one that joins the upper to the inner part of the shoe.

In the midfoot area (height 24 mm) there is only one layer of EVA which instead doubles on the
tip, where the toes, in the take-off phase, give the final push. This
thin insert reducing the compression phase of the EVA softer, allows to contain
the dispersion of energy to the benefit of running performance.
lapa6

The sole is made of solid rubber with high abrasion resistance that fits both perfectly
to hard surfaces such as asphalt and to the easy dirt tracks of the dirt tracks. His
arrangement on the midsole and the design follows (front) those that are the lines of
natural crease of the feet. In the heel part, in the outer rear portion it is
slightly raised to protect the midsole and ensure greater durability.
lapa6
The removable insole, in light and shaped Eva, has the purpose of obtaining comfort and contributes
to the overall cushioning of the shoe. As mentioned at the beginning, the shape of the
shoe is traditional in the medial and back, while the front area, where
they house the fingers and the metatarsals is slightly wider than the standard at which it is
normally accustomed, this trick is essential to allow the fingers of the
feet to always find adequate space in the phases preceding the take-off, when the area
of the metatarsals tends, lowering, to widen to optimize the thrust phase. The waves
of the upper also serve to respond to the need to delicately bind that
portion of the foot.
iten2g
Finally, there is no lack of details related to Kenyan culture, and in addition to those already highlighted
in the upper (ENDA logo and National flag) there is a webbing in the back that
it serves to facilitate the fit that presents designs that recall typical designs of fabrics
Swahili. Even the waves of the upper have a Kenyan appeal, they represent
in fact the waves that are formed when a strong wind blows towards the land on the Indian ocean.
Another element closely linked to the Kenyan culture is the embossed HARAMBEE inscription
in the midsole. Harambee (Ha-rum-bay) is the official motto of Kenya, which in Swahili language,
means "let's all get together" and is used to refer to times when communities do
they combine to accomplish something that individuals could not do on their own.
Always in the lower part of the midsole, in the hollow that starts from the heel and reaches the
medial part there are micro grooves that represent the topographical map of the
Rift Walley.

Finally a note on the color charts where the variety of colors of the ENDA models and theirs
pairing takes up the characteristic colors of the plumage of some of the most common birds
of the highlands of Kenya.

TECHNICAL NOTES → Lapatet 1.5
Neutral shoe
Gr. 255 - 9 US man - 10,5 US woman
Drop - 6 mm
EVA Midsole & double density Midsole
High density rubber sole
Upper light knit
Made in Kenya
2021.01.24 GG

Wahoo SPEEDPLAY: Bilateral bicycle pedals

Wahoo SPEEDPLAY is the only bilateral pedal platform that offers the ultimate in efficiency, engagement and comfort. Together, these benefits provide a direct link between rider and bike, maximizing each pedal stroke through fit and float adapted to individual pedaling dynamics.

SPEEDPLAY NANO


The very light SPEEDPLAY NANO, ready for the podium, offers every advantage in the race.

SPINDLE: Titanium
WEIGHT: 168 g

SPEEDPLAY ZERO


The revolutionary SPEEDPLAY ZERO, ready for competition, offers maximum power transfer with exceptional durability.

SPINDLE: stainless steel
WEIGHT: 222g

SPEEDPLAY COMP


The versatile SPEEDPLAY COMP, ready to ride, offers benefits to cyclists of all levels.

SPINDLE: Molybdenum chrome steel
WEIGHT: 232g

SPEEDPLAY AERO


SPEEDPLAY AERO, knurled and aerodynamic, defies the wind, increases speed and delivers results.

SPINDLE: stainless steel
WEIGHT: 224g



PERFORMANCE BEYOND THE LIMITS

SPEEDPLAY is the only pedal system that offers independent 3-axis adjustment to optimize fit and improve performance through improved biomechanics.

IDEAL FORWARD AND BACKWARD POSITIONING
The cleat support base offers 14mm back and forth adjustability to fit your unique physiology.

Running shoe ENDA KOOBI FORA, made in Kenya

ENDA KOOBI FORA

KOOBI1
The name KOOBI FORA comes from an important archaeological site near Lake Turkana
north-west of the Kenyan country, where the most ancient fossils that belonged were found
to Homo Rudolfensis.

KOOBI FORA is a TRAIL RUNNING shoe ideal for medium distances (up to 40-50
km) and if used by performing runners it is also suitable for more demanding distances.
Like the rest of the ENDA collection, it is a neutral, light and comfortable shoe that he prefers
quick supports and an efficient run.

Here are the characteristics of the KOOBI FORA

The upper is in thin multilayer mesh, resistant and breathable but with a closed weave for
eliminate the entry of macro-dust and is coupled, both in the internal medial portion and
external, by 4 thin heat-sealed bands that, once the lacing is completed, allow the
upper to wrap the foot and make it one with the shoe. These heat-sealed inserts
in their external portion of the upper they also become laces-loops precisely for
generate a custom fitting.

KOOBI2

There is no traditional lace-up tongue (TONGUE ) which is replaced by a thin e
non-constricting sock in highly breathable perforated mesh that prevents little ones
pebbles and solid residues from entering the collar inside the shoe that integrates
perfectly with the heel collar.
KOOBI3
Contrary to what normally happens with similar solutions normally adopted,
the tension of the collar is delicate, especially in its front part, and does not affect the
speed of fitting of the shoe and on the sliding of the foot inside it.

The construction of the lacing system, as already mentioned, provides for large buttonholes
where the laces pass and integrates a trapezoidal flap that increases the protection of the back
of the foot by covering the special construction of the entrance sock in the body of the shoe.
This particular construction allows you to tension the lacing in an optimal way
creating a stable fit also thanks to the binding buttonhole for the laces and not constricting for the
peripheral circulation of the dorsum of the foot.
KOOBI4
To highlight the light TPU insert to protect the first metatarsal and all the fingers
that wraps the entire tip at 180 °, without being invasive for the fingers themselves during
dynamics of movement of the foot inside the shoe. This like in the other models
ENDA is possible thanks to an increased volume of that specific area of the
shoe.
KOOBI5
The heel counter is semi-rigid to stabilize the rear foot, which is useful for reducing
the torsional effect of the shoe during the support phases of the midfoot in order to
allow the Achilles tendon to work in line with the pushing forces. The collar is instead
soft thanks to the delicate sponges used inside. There is also a webbing
with ring to facilitate the fit, tape that in addition to having designs attributable to the
Kenyan culture printed the name ENDA.
KOOBI6
The midsole used is the same as on the ITEN but is integrated by a thin sheet
full-length nylon to change the stability and protection characteristics of the foot
in typical Trail running situations.

The midsole is in blown EVA, very balanced and with a low profile, in fact it has a
front - rear differential of 4 mm (Drop) that invites you to search for the best support
possible of midfoot. The fact remains that in the back, in the heel area, there is
an insert that increases the cushioning, protection and overall stability of the
footwear whose details we will see in a few lines.

KOOBI7

The front design of the midsole is therefore lowered compared to the standard of footwear
traditional and well suited to the increased volumes of the upper, where the toes of the
feet, to allow that natural enlargement of the metatarsal structure in the phase of
support and thrust even more important in off-road.

To reduce the torsional effect of the shoe, in addition to the aforementioned thin nylon insert, the part
rear of the midsole, in the heel area where there is the second layer of EVA (colored in
contrast) wraps the foot welcoming it with a slightly cupped shape to limit the
lateral movements of the foot, useful device in quick changes of direction as well as
for the aforementioned overall stability of the shoe.
KOOBI8

The sole is in solid rubber with high resistance and traction, and is in full contact with the
ground with the particularity of having flexion grooves just in front of the metatarsals
they generate 2 areas of different sizes, a smaller one positioned under the big toe and the other
greater for the remaining 4 fingers. This solution is closely related to the choice to have
a wider area for the support of the fingers so that in the pre-detachment and detachment phases
metatarsal joints are in a position to express maximum efficiency.
The sole which has a slightly increased thickness, when compared with the models
road, has a design that allows a good MUD RELISE (mud release) even if the
footwear is not born for particularly muddy soils but the particular design leaves
uncovered the lugs in the shape of a spear point to ensure optimal traction. The anchors do not
they are very deep to limit that unpleasant feeling of tessellation when running
on harder surfaces. From this point of view, also the horizontal recess placed at the medial level
it allows to dissect the more robust portion of the meso foot (the internal one) from the more
light (external) offering the latter a greater support surface.
On the toe of the shoe the sole rises towards the toe protection insert while maintaining it
same design and tessellation to guarantee traction even in situations where it is necessary
making the most extreme tip of the shoe work.
KOOBI9
Also not to be overlooked are the small rear recesses that work to not block
completely the torsional effect in that portion of the shoe. In the medial portion
inside, just above the word HARAMBEE the sole without the 3 small holes present on the
ITEN to increase the protection of the underlying midsole.
KOOBI10
The removable insole , in light and shaped EVA, aims to balance comfort and
contributes to the overall cushioning of the shoe in relation to the presence of the thin
kevlar sheet already mentioned. And as also mentioned in the beginning, the shape of the shoe is
traditional in the medial and posterior part, while the anterior area, where the fingers are lodged
and the metatarsals is slightly wider than the standard one is normally accustomed to,
this trick is essential to allow the toes to always find
adequate space in the phases preceding the detachment, when the metatarsal area tends,
lowering, widening to optimize the thrust phase and increase the feeling between the foot
and land.
KOOBI11
Also for the KOOBI FORA there is no lack of details related to the Kenyan culture, and in addition to the
mentioned tape to facilitate the fit, we find on the midsole is the word HARAMBEE.
Harambee (Ha-rum-bay) is Kenya's official motto, which in Swahili means
"let's all get together" and is used to refer to times when communities come together
to accomplish something that individuals could not do on their own. The detail of 12
grooves in the outer portion of the midsole are the reference to the date of 12 December,
Jamhuru Day, the day when Kenya gained independence in 1963 for a year thereafter
after exactly becoming a republic.
KOOBI12
Printed on the heel buttress we then find the symbol present in the center of the flag
Kenyana or the Masai shield with 2 crossed spears whose stylized tip is the logo of
ENDA.

The logo is present both on the upper and on the sole, as if to leave a trace of the
passage of Kenyan culture; on the laces passes the figure 1470 which recalls the
KNM-ER code 1470 which was the acronym that identified the remains of Homo Rudolfensis found
in the archaeological site of Koobi Fora.

Finally a note on the color charts where the variety of colors of the ENDA models and theirs
pairing takes up the characteristic colors of the plumage of some of the most common birds
of the highlands of Kenya.

TECHNICAL NOTES
TRAIL RUNNING Neutral shoe
Gr 280 - 9 US man - 10,5 US woman
Drop - 4 mm
EVA Midsole & Midsole double density + kevlar sheet
High density rubber sole
Upper engineered mesh
Made in Kenya
2021.05.29 GG
Joomla SEF URLs by Artio
Realizzazione Ecommerce Siti Web e Grafica Web agency Arezzo Siti Web e Grafica
↑