Tel/Fax: +39 055.828315 [email protected] / Facebook
Tel/Fax: +39 055.828315 [email protected] / Facebook
Motus Triathlon
Cart empty 🛒
Manufacturer
Sports Passion

News on Triathlon, cycling, running and Swimming

The latest news from the Joomla! Team

MUTE TRIATHLON: HOW DO YOU CHOOSE?

What factors to consider when choosing a mute?
Insulation - Generally more often is the neoprene and the mud is hotter. The maximum permissible thickness of neoprene is 5 mm. The type of neoprene can also be relevant. For example, some nuts are now made with integrated air bags in the thickness of neoprene to improve both buoyancy and heat retention, and ultimately to reduce the thickness of the mated to the same thickness. Some water leaks may occur at the zip; So the longer the zipper is and the more the cooling is, but this will not make a big difference. The nuts are designed to allow a thin layer of water to settle between the mud and your body, so the shape of the mute is important. If the muff is too large, more water can flow through the mud and this will have a cooling effect.
Floatability - For very muscular athletes or for first-time athletes, buoyancy is very important. P thick rings on your abdomen and in the legs can help lift you more in the water. Integrated air bags in these regions can also make a difference. Faster and / or slim athletes do not require additional buoyancy as they may also experience a disadvantage if the trim rises too much, preventing them from keeping the bucket under the water.
Flexibility - Freedom of movement is the key, especially around the shoulders and arms. Some mutes are made with more flexible and thin materials around these areas to reduce the resistance to movement while swimming. The quality of materials and coatings is fundamental to this. The quality of the neoprene can be good, but if the coating is cheap or has been attached in the wrong direction the elasticity of the mud will be limited. If the fit on the body is too short or narrow the damage is consistent, so the shape of the wrist becomes fundamental.
Resistance - The surface of some mutes is coated with a material that reduces resistance. There are several types of lining that make the waist more or less slippery.
Weight - It's not an important factor, but like many other things related to sport ..... the lighter is better. Even in this case, the drowned air technologies in the neoprene can help, as well as help the way it is cut and molded. The weight factor will be greater if you swim in the pool or lake and the bad fit of the muta will force you to carry excessive water bags at places where the mule does not dress properly; this water has to 'carry it' throughout the path of Swimming with you! . The poor fit of the body dul can also increase the frontal section of the man + muta assembly, which is equivalent to greater resistance to advancement.
Cost - We all have a budget and need to find the best option possible for that budget. The only area where you should not compromise is the right fit. If the mute does not dress well, do not buy it ...... although it costs a little
Quality - The following has an impact on the length of the mud:
- Are seams sewn and glued?
- Neoprene and lining are durable as well as flexible?

When a mule is of the right size?
If you wear the muff for the first time you might feel a bit claustrophobic, but do not panic! A mock triathlon is designed to fit like a second skin. However, in spite of this "claustrophobic" feeling, the mud should look comfortable when wearing it.
When you start swim the mud will fill with a little water, which will expand along the mud by lifting it a bit from the body. Water between the mute and your body quickly warms up to a comfortable temperature.
Your neckline should be flush with your skin to prevent excess water from entering the mucus, but do not rub or force your neck too much. They are claiming low-waist lines on the market , as they feel more natural. The only way to know if your neckline rubbing is to bathe with the muff, because the position and the movement of your head is so decisive.
Once worn, try to pull the muff away from the skin: ideally it should act as a vacuum, or suck the muff to you if you just released it. If there are obvious creases, these are the points where water can over-stagnate once you are swimming.
Flexible arm materials are widespread as they provide greater comfort and a better feeling of water, but the negative aspect, if the fit is not sufficiently adherent, is that the wristband can be stretched / widened by allowing the water to flow, While swimming (resulting in increased strength effect). Wrist holdings have been designed to ward off this effect.
If the mucus is too tight on the chest, you can work hard to completely swell the lungs with the effect of having the short breath. If it is too large, too much water enters the mud. If your arms and legs are too tight, pull out the mud at the end of the bath becomes a business and you can also get cold and numb hands and feet. Even in this case too wide a limb in the limbs allows too much water to enter the mud. If the length of the trunk is too short it will increase the pressure on the shoulders and arms. In that case, the mute can detach itself from your lower back and you feel as though the muta was pulling you back.
Ideally, the arm and leg length should match exactly, but if so, there is the possibility of cutting and removing the excess length to make the mud easier to remove. However, it should be remembered that the limbs are tapered and, if the lining is too short, the lining can then be wider around the limbs.
Instructions for care and maintenance
Check the instructions provided with the mud. If there are no then the information below is a good start:
- Use non-petroleum lubricants only around the wrists, neck and ankles to avoid rubbing or to help remove the mud. They are effective and do not make sewing or damage the neoprene.
-
Rinse with fresh water after each use
-
You can find a muddy shampoo or use a normal baby shampoo, but just use this from time to time.
- Ascend first inside and out,
away from direct sunlight or heat
-
After dry check to see if there is damage.
-
If you find some small cut or grease, you will immediately repair it with neoprene glue.
-
Keep the mud in a cool and dry place on a well-groomed grout to prevent creasing.
-
To find out more about serious issues, contact MOTUS, the triathlon store that can advise you on what to do.
Remember: Most nuts have a one-year warranty, with repair or replacement for any manufacturing defect, but not in case of accidental or inconvenient.

How to wear a mute
Take care to put the mud. While it is important to be able to pull it out quickly, there is no need to hurry in wearing it. You may need to ask a companion to assist you in closing the zip.
- Remove watches or wrist jewelry
-
Avoid neoprene contact with your nails, use your fingertips to avoid tearing off the smooth surface of the muff.
-
If necessary, apply non-petroleum based lubricants (such as MOTUS) to the wrist, neck and ankles.
-
The jumper of the suit goes to the back.
-
Get into the mud with your legs up to your knees and then get up to the horse. Make sure your suit is threaded up to your horse before you start with the upper body.
-
Slip in both arms, working first one and then the other up to the shoulder. Do not close the mud until most of the game has been worked up to the shoulders.
-
Ask for assistance to close the zip. Pull the shoulder blades inside before asking a friend to close the zipper.
-
Remember that it will be much easier to make final adjustments when you are wet. Put the mud as comfortable as possible, then dive into the water and swim for a few seconds, stop, adjust and work the space left up to the horse and shoulders. Now you're ready to go.
How to remove the mud
Start pulling the mud as soon as the water comes out . It is easier to remove when it is wet .
Pull down the zip and pull out your arms before pulling the top of the mud down . In this position you should be able to run efficiently up to the gear change zone .
Once you reach the change zone, remove the headset and the goggles shortly before reaching your seat.
With a single movement lower the waist up to the knee , then standing upright and without using your hands to move and kick your legs individually to remove the mud
Finally put the suit in the assigned area .

TRIATHLON: HOW TO ALLOW THE SPEED

TRAINING IN SPEED
What does speed training mean?
For triathletes, speed training usually refers to:
  • Stimulation sessions of anaerobic energy systems, usually carried out beyond the 'rhythm of race'
  • Sessions with the goal of increasing the economy of movement through all the rhythms used in a race
Speed ​​training, in terms of energy systems
In the article about resistance training, the 3 energy systems were introduced and discussed how increasing the aerobic capacity and efficiency of aerobic metabolism is important for endurance performance. Speed ​​training could be considered as the set of sessions that aim to develop the ATP-CP energy system and anaerobic metabolism, which are predominant during exercise up to 10 seconds and 60 seconds, respectively. Training of the ATP-CP system is often referred to as maximum speed or maximum training, while anaerobic metabolism training can be defined as that of lactate production or lactate tolerance. Here is a summary of the main advantages of each, as indicated in Ernest Maglischo's 'Fast Swimming' text (although the principles apply equally to bike and race):
Lactate tolerance:
Increase muscle buffering capacity
Improvement in the ability of swimmers to maintain good technique despite severe acidosis
Improving the ability of swimmers to tolerate the pain of severe acidosis
Lactate production:
Increase in the rate of anaerobic metabolism
Maximum sprint speed increase (fast final sprint)
Maximum Speed ​​/ Power:
An increase in muscular strength
An increase in the rate of stimulation of muscle fibers by the CNS
An increase in the rate of strength development in the muscles
It is worth noting that the speed to keep in repeats for each type of workout above is maximum or close to the maximum. You might think that as you often do not swim, do not jog, or run at maximum speed in a triathlon race, then these are not useful training types. But let's make some considerations:
  • Sometimes, during the start of the swim, or along a steep bike ride or during a running racing flight, you will experience severe acidosis in anaerobic metabolism and it is helpful to be prepared for this event in order to be able to recover.
  • Exercise next to max speed will ensure recruitment of type 2 fibers that otherwise may remain uninsured. This can be a great workout for muscle recruitment. In the case of Lactate tolerance training, a secondary benefit may be the increase in VO2 max.
  • By increasing the maximum speed / power, the threshold values ​​rise and therefore during the race you work at a lower percentage of the maximum ns: in this way there is more room for improvement / acceleration in the race.
  • The body becomes effective in what it exercises; So if you swim 'slowly' all the time you will get efficiency in slow swimming. The more time you spend on the 'step' or the higher step, the more your body becomes accustomed to the movement and recruitment patterns of the muscles involved.
  • Moderate amount of training at the maximum speed / power and training for lactate production can be included regularly in your training sessions without having a significant impact on the other forms of training you are taking. It is worth noting that the same thing can not be said for the work of lactation tolerance.
  • The body will respond better to a variety of training stimuli than what happens with excessive resistance training.
  • Resistance training can become tedious so it is also nice to do a bit of speed.
Speed ​​training in terms of motion economy
It has been said before the body gets efficiency in what it practices, and has also talked about the gesture economy during the article on resistance training. This is partly due to the fact that the body learns to contract and relax the key muscle groups involved in the movement efficiently, work only when needed. They also train the stabilizing muscles needed when moving at high speeds. Finally, it gives the muscles, ligaments and tendons a way to adapt to a more optimal range of movements.
For a triathlete would not it be useful to be able to replicate speed and motor pattern equal to or greater than the racing pace without the fatigue associated with them? This means that it could be done more often, longer, without risking injuries or overtraining.
In your workouts you might try some of the following workout methods:
  • Swim: Finishes - Using fins to increase swing rhythm at racing pace or at higher pace, but at a lower energy cost. This will fit your body to the sensation of a swim at this step.
  • Swim: arm frequency - Use timing devices to gain awareness of the arm frequency you are using and, if necessary, increase the frequency to the desired level. Many triathletes, particularly those swimming in swimming, swim at frequencies below 40 per minute (meaning a arm each time each arm enters the water). This is often due to excessive slipping / pause after the recovery arm has entered the water. Elite swimmers in swimming water often swim with arm frequency higher than 80 / min; This shows that to swim quickly, it is not enough simply to concentrate on the swim distance. After building the base for an efficient arm, try to take the 60-arm / minute aim. The arm frequency can then be used as a parameter for vs training rather than swim speed, allowing your body to get used to racing rhythms without the associated ego fatigue (the secret is to use these blink frequencies without losing Distance for each arm, so it is not necessary to increase the arm frequency too fast)
  • Bike: Cadence Ranges (Max Cadence and Keepable) - The great bike thing is the reports! They allow us to choose the combination of cadence and strength that best suits us. Swimmers and runners must be able to coordinate their movements when their limbs move at high speed, which is a real problem for many people and is one of the major performance limits in these disciplines. In cycling 'strong' athletes with poor coordination / leg speeds, they can ride very fast just pushing higher gears. This is fine if you are big and strong and all you want to do is stop trial, but I feel I recommend all triathletes to work on low resistances and high cadences. The two objectives for these sessions are as follows:
    -
    Increase the cadence peak that you can reach while keeping your racing position (if you can get more than 200rpm you are doing well!)
    -
    Increase the cadence that you can maintain for prolonged periods, for example 30 seconds to 5 minutes (to be able to keep more than 120 rpm while you are in the racing position without bouncing on the saddle, it is a good point to reference).
  •    Run: Cadenza repeated - We refer to Jack Daniels with regard to the optimal cadence. Using a series of moderate rhythm exercises (eg marathon rhythm) focusing on faster pace use can be very effective for the next advanced stage of preparation when the workouts are more intense.
  • Run: Downhill Run - It would be nice if we had gears like a bike. Running along very gradient slopes can act as a small chain of gears that allow you to turn your high speed legs without the energy cost associated with running at the same speed in the plane.
  • As a last option, race with a dog. Wear a belt around the waist, which is attached to a dog. Your hands are free to move like a normal racing action. Your four-legged friend will force you to make an average pace of execution much faster than it would otherwise be.
In summary - For many triathletes, speed is a limiter for their performance. This often happens because they have avoided stimulating anaerobic energy systems to adapt more to aerobic work. However, it is more likely that habitual long-distance stationary work has worsened their gesture economy at race intensity. A good example of this comes from the race. Most of the best marathoners started their career as midway track runners. They have developed their technical ability to perform speed actions before starting to compete competitively over long distances. It is very difficult to imagine being able to run for more than 2 hours at 19 km / h and beyond, if you can not even run at that rhythm a 5k! This does not mean that if you are a beginner Ironman then you need to include a lot of anaerobic sets in your preparation, but you should perhaps include some of the above ideas to counteract the effects of constant training over long distances .

BH AEROLIGHT: EUROBIKE 2012 PRESENTATION

A new bike triathlon semi-integrated with particular brake installation from the chassis the Spaniards.

Instead of a fully integrated system for the stem, BH uses a standard steerer tube for mounting the handlebar. The top tube of the frame is raised to eliminate the gap (the scalinoo) behind the stem in the low position, with a stem created ad hoc to blend smoothly with the shape the frame. Special steering tube spacers may raise the stem up 45 mm above the steer tube, just like a typical stem, if you want to raise higher the handlebars.

The frame measures graph BH on show at Eurobike was devoid of signs of the stack and reach, the best way to evaluate the features of adaptation of a bicycle. Standard frame sizes were available and indicate that the frame Aerolight fits in a manner similar to the current GC Aero tri bike. The top tube and head tube length suggest that this bike is adapted moderately vertical driving styles instead of forcing triathletes to support only aerodynamic positions thrusts.


BH uses two additional bays for bottle cage on horizontal tube just behind the stem, to give the rider the ability to add additional devices of hydration. The Spanish company is planning to create a bottle or a porta-objects/fingers to be installed on a horizontal pipe, filling the empty space if you drive with a stem in high position.

Peter Shigo, manager of R & D, BH has been designing the bike with a specific rule of bracket-BB386, which is quite large, in order to achieve the goals of lateral stiffness. They do not consider other types of BB. The aerodynamic characteristics of the bike have been designed in relation to that specific feature sets.

After completing the project of Aerolight, BH has tested a prototype form equal to that of the final bike, wind tunnel FASTER in Arizona. The shape of the frame has not been altered or modified as a result of this test, it was just a "validation", says Shigo.

Borrowing a strategy of Cervelo, BH has blunted the tube where the bottle cage mounts, so wrap the bottle to improve performance in real race conditions and not the test conditions without water bottles mounted on the bike.

As you can see in the photo gallery, the rest of the tube is an aerofoil with a ledge down that acts as an invitation of the front wheel. The steering tube is wide enough for needs of stiffness, and uses a headset 1-1/8th ". Shigo says that the frame has been designed in consideration of the UCI, "with all forms of pipes in accordance with the 3: 1 ratio imposed by the governing body of cycling, ...

Instead of using a single brake support, Shigo has provided many so that the frame Aerolight can use different brake types. The bike in view and all complete bikes planned for 2013 include use of TRP V-brake, but we can also accommodate the typical road style clamps.

"The brakes give you the freedom to use virtually any brake on the market," says Shigo. "During the development cycle, came out interesting proposals for the brakes, in particular hydraulic calipers RT 8TT Magura, and so we wanted to be able to keep them. The multiplicity of brakes provides flexibility in price, and also provides consumers with the ability to create the bike you want. "

The downside of this flexibility seems to be mainly aesthetic: brake unused media become slightly unsightly (open hole) but this has no functional impact on the bike.


BH sells the set frame and four full versions of Aerolight.. GH Aero frame will remain the Foundation of their bike triathlon at lower prices

The Aerolight is compatible for both transmission groups both electronic and cable
Joomla SEF URLs by Artio
Realizzazione Ecommerce Siti Web e Grafica Web agency Arezzo Siti Web e Grafica
↑